Welcome to JESKON SYSTEMS

PRODUCTS

Conductivity Point Level Swittch/s

Products >> Instrumentation & Process Control >> Level Measuring & Controlling >> Conductivity Point Level Swittch/s


	Technical Specifications (Standard )
	SWITCHING UNIT :
	Housing : Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting
	Cable entry : 3 nos.
	Ambient temperature : 0 ° C to +60° C
	Power consumption : 1.9 VA
	Mains Voltage : 230/110 V AC (+/-15%), 50 Hz or 24 V DC (ON REQUEST)
	Output : 1 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads.
	Safety operation : Field selected switch over for min. or max. (FSL/FSH) switching points.
	Switch status display : Green LED shows Normal, Red LED shows alarm.
	Response Time : 0.5 Sec
	Weight : 1.5 Kg Cast Al.

Salient Features

No moving part, free from maintenance.

No special cable required for signal transmission, ECONOMICAL to install.

Long cable connection permissible between probe and evaluation unit.

AC on probes for prevention of electrolytic deterioration of electrodes.

Low voltage on probe for operational safety.

Variety of control functions and installation system available, beside single point switching.

	Two point action for automatic pump control.
	Two point independent switching.
	Three point switching, two points with pump control logic and one independent point
	Four point switching having two-pump control logic.

Variety of probes available for various process conditions

Multichannel - 4 point independent switching available for various process conditions.