TFS software Main Screen

Monitor up to 32 tanks from this supervisory screen. Tank names are displayed with the current level, temperature and relay/alarm states in each tank.

TFS Tank Farm Supervisor continuously scans the tank farm network so that level and relay changes are displayed.

TFS software is 'supervisory' only. The TFT32 Tank Farm Transmitters at each tank continue to function even if the software is not running.

Tank Parameters screen

TFS software settings for each tank can be configured individually. Enter a tank or transmitter name and then select a display mode in "linear" units like feet or meters, "volume" units like gallons or liters, or "other" units like lbs, barrels, temperature or flow.

Dial-up Locations screen

Your 'tank farm' can include tanks at any location in the world. You just need regular phone lines and modems. From this screen configure TFS Tank Farm Supervisor software to sequentially dial up to 32 telephone numbers. You control how frequently each location is dialed, or leave the dial-up location permanently connected.

Data Logging screen

Use the TFS software's powerful data logging system to store log files on your PC's hard drive. Level readings from each tank can be stored in a separate log file. You have complete control over the logging frequency through this set-up screen. With TFS software you can keep a valuable digital record of inventory.

Up to 6 Control Relays for each tank

Calibrate Greyline RB12 Relay Boards right from your PC. Set alarm ON and OFF set points for each tank in the network - even at dial-up locations.

Share information on your LAN
Use Greyline's 'TFC Tank Farm Client' software and any number of users on your LAN can also monitor and data log some or all of the tanks in your network