AUTOMOBILE EQUIPEMENTS
| SALIENT FEATURES | |
| Suitable for painting all types of passenger cars | |
| Available with Concrete Base / Metal Base | |
| Positive Pressure type with Vertical Down Draft Airflow | |
| Balance Front Doors(2 Nos) to facilitate easy entry of cars | |
| Booth construction through 50mm thick Pre-fabricated double skinned panels of GI sheet | |
| Panel insulation through non-combustible compressed glass-wool | |
| Unique Panel Joints to ensure highest structural strength and air tight sealing | |
| Air Inlet / Exhaust blower: Double inlet forward curved heavy duty fan for high volume of air at low rpm, low noise and low vibration | |
| Stainless Steel Heat Exchanger Unit | |
| Imported, Automatic, diesel-fired Burner | |
| Service doors can be installed on any four sides of Paint Booth | |
| Hot Air Generator unit can be installed on any three sides except face | |
| Digital timer for accurate baking time | |
| Recycling facility during baking phase to ensure fuel efficiency | |
| Cleanable Pre-filter and floor-filter | |
| Provision for Extractor unit (Optional) | |
| Provision for Paint Mixing Room (Optional) | |
| Vertical tube lights on side walls for additional illuminations (optional) | |
| Paint Booths with customer specified dimensions can also be offered | |
| Also available Bus body Paint Booths | |
| SAFETY FEATURES | |
| All motors & lighting protected with MCBs | |
| Service door opens automatically when there is excess pressure in the Paint Booth | |
| Safety locking between Burner & Inlet Blower | |
| TECHNICAL SPECIFICATION | |
| Working Size | Length(Standard) : 6,000 mm (Optional) : 7,000 mm Width : 3,950 mm Height : 2,600 mm |
| Metal base (Optional) | Height: 350 mm |
| Plenum | Height : 3,100 mm Width : 450 mm |
| Size of Main Door (2 nos. each) |
Height : 2,600 mm Width : 1,300 mm |
| Size of Service Door | Height : 1,800 mm Width : 600 mm |
| Heat Output at full load | 1,20,000 k.Cal/hr. |
| Fuel | HSD |
| Fuel Consumption | 8 to 12 litres/hr |
| Air Inlet Blower | 20,000 m³/hr, 10 H.P motor 1440 rpm, 3 phase, 415 v |
| Exhaust Blower (optional) | 14,000 m³/hr, 3 H.P motor 1440 rpm, 3 phase, 415 v |
| FILTER | |
| Pre-filter | Imported EU3 class Synthetic micro fibre media |
| Ceiling filter | Imported EU5 class, Synthetic micro fibre media |
| Floor filter | Synthetic micro fibre media |
| SPACE REQUIREMENT (Min.) | |
| Paint Booth (L x W x H) | 7300 mm x 4100 mm x 3500 mm 24 ft x 13.5 ft x 11.5 ft |
| Hot Air Generator Unit(L x W) | 1250 mm x 1700 mm |
| Exhaust Unit (L x W) | 1500 mm x 1500 mm |